Free Shipping on Transfers $99+

DTF Transfers size guide including various garment print sizes for precise customization.
DTF Transfers by Size Fast Shipping
Load image into Gallery viewer, DTF Transfers size guide including various garment print sizes for precise customization.
Load image into Gallery viewer, DTF Transfers by Size Fast Shipping

DTF Transfers by Size

Customization with Precision: Achieve perfect customization while ensuring precise sizing for every print. Seamlessly adjust your designs to match specific garment dimensions, delivering tailored results without any extra effort.

Optimize with Size-Specific Solutions: Break free from the limitations of one-size-fits-all transfers. Our transfer sheets come in various sizes, allowing you to maximize each design's impact—whether it's a small emblem or a bold, full-scale graphic—perfectly fitted to its intended garment.

Boost Efficiency, Save Time: Enhance your production workflow with our size-tailored transfer sheets, eliminating the need for manual resizing. Focus on creating outstanding prints with greater speed and efficiency, ensuring top-quality results every time without losing precious production time.

Application & Care Guide

Use these professional settings for the best results. Always run a small test first, as presses may vary.

General Application Settings

  • Temperature: 290–320°F
  • Time: 8–15 sec
  • Pressure: Medium (35–45 psi / 3–4 bar)
  • Peel: Hot peel – remove film immediately while warm

Fabric-Specific Recommendations

FabricTemp (°F)Time (sec)Notes
Cotton310–32012–15Durable, best wash resistance
Polyester285–3008–10Lower heat to avoid scorching
Cotton/Poly Blends300–31010–12Helps reduce dye migration
Spandex / Lycra285–2958–10Do not overstretch fabric
Denim32015–20Use firm pressure
Fleece / Wool30012–15Pre-press to flatten
Leather / PU275–2856–8Test first, low heat only
Fabric
Cotton
Temp
310–320 °F
Time
12–15 sec
Notes
Durable, best wash resistance
Fabric
Polyester
Temp
285–300 °F
Time
8–10 sec
Notes
Lower heat to avoid scorching
Fabric
Cotton/Poly Blends
Temp
300–310 °F
Time
10–12 sec
Notes
Helps reduce dye migration
Fabric
Spandex / Lycra
Temp
285–295 °F
Time
8–10 sec
Notes
Do not overstretch fabric
Fabric
Denim
Temp
320 °F
Time
15–20 sec
Notes
Use firm pressure
Fabric
Fleece / Wool
Temp
300 °F
Time
12–15 sec
Notes
Pre-press to flatten
Fabric
Leather / PU
Temp
275–285 °F
Time
6–8 sec
Notes
Test first, low heat only

Product-Based Guidelines

  • T-Shirts & Hoodies: 310°F / 12 sec
  • Caps: 290°F / 12 sec
  • Tote Bags: 310°F / 10 sec, firm pressure
  • Jackets (Poly/Nylon): 290°F / 8 sec, protective sheet
  • Sports Jerseys: 285–300°F / 8–10 sec, plus 2–3 sec finish press

Extra Tips

  • Pre-press garment 2–3 sec to remove wrinkles & moisture
  • Always use parchment or Teflon sheet

DTF Transfer Care Instructions

  • Wash inside out at 30 °C (86 °F)
  • Do not bleach, tumble dry, or iron directly on the design
  • Wait 24 h before first wash
✅ Keep your press clean and flat for consistent pressure across the whole transfer.

Step by step how to use our transfers.

Place & Remove Dust

Position your Product on the heat press and use a lint roller to remove any dust or fibers. Pre-press for wrinkles.

Place the Transfer & Press

Align your DTF transfer on the shirt, cover it with parchment paper, and press firmly according to the recommended temperature and time.

Peel & Press Again for Durability

Gently and immediately peel off the film while it's warm, then press once more for a few seconds to ensure a smooth, long-lasting finish.