Bear Transfers — HyperColor DTF
Richer Color, Same Hot Peel: HyperColor Gang Sheets
Turn your artwork into a full sheet of HyperColor DTF transfers right in your browser. HyperColor swaps standard CMYK for a 9-color RB ink set, giving you a noticeably wider gamut and tighter color consistency — ideal for gradients, brand-exact colors, and photoreal designs. Pricing starts at $3.66/ft, and you only pay for the length you build.
Drag, drop, and arrange as many designs as you want on one gang sheet to squeeze the most out of every foot. Prefer the classic look or a lower price point? Compare it with our standard DTF gang sheet builder — the workflow is the same, HyperColor just pushes the color further.
Every order is hot peel, rated for 75+ washes, and ships in 24 hours with no minimums and no setup fees. Check exact per-foot rates on our DTF pricing page before you build.
Nine-Color RB Ink for a Wider Gamut
HyperColor prints on a 9-color RB ink set rather than the usual four-color CMYK, so it reproduces a broader slice of the color wheel. Gradients stay smooth, brand colors land closer to spec, and hard-to-hit tones — neon-adjacent shades, deep purples, natural skin tones — come out fuller and more accurate. You also get tighter batch-to-batch consistency, so a reorder next month matches the run you printed today.
Same Hot-Peel Workflow, Zero Learning Curve
If you already press standard DTF, nothing changes. HyperColor uses the exact same application: 290–320°F for 8–15 seconds at medium-firm pressure, then a clean hot peel while the transfer is still warm. Prints are rated for 75+ washes with no cracking or fading, ship within 24 hours (Mon–Fri), and carry no minimum order or setup fee — you just get richer color for the same effort.
Already ganged up your file? Skip the builder and upload a finished HyperColor gang sheet, or browse ready-to-press designs in the full HyperColor collection.
HyperColor FAQ
What makes HyperColor different from standard DTF?
HyperColor prints on a 9-color RB ink set instead of standard CMYK, so you get a wider color gamut and tighter batch-to-batch consistency — especially on gradients, brand colors, and skin tones. Everything else stays the same: it's still a hot-peel transfer you press with a normal heat press.
How much do HyperColor gang sheets cost?
HyperColor gang sheets start at $3.66 per foot, and you only pay for the length you actually build — there's no minimum order and no setup fee. Because you gang multiple designs onto one sheet, the more you fill each foot, the lower your effective cost per individual design.
Do HyperColor transfers press like regular DTF?
Yes — the press workflow is identical to standard DTF. Press at 290–320°F for 8–15 seconds with medium-firm pressure, then hot peel while the transfer is still warm. If you're new to it, our heat-press settings guide walks through temperature, time, and pressure for cotton, poly, and blends.
How durable are HyperColor prints?
Very — HyperColor holds up to 75+ washes without cracking, peeling, or fading, the same durability standard as our regular DTF. The richer 9-color ink doesn't trade off longevity; wash inside-out in cold water and skip high-heat drying to keep colors looking their sharpest for years.
When should I choose HyperColor over standard DTF?
Reach for HyperColor when color accuracy matters most — vibrant gradients, exact brand colors, photoreal artwork, or neon-adjacent tones that standard CMYK can dull. For simple text or one-color logos, regular DTF is plenty. Both ship in 24 hours and press the same way, so it really comes down to the artwork.
What printers say
Write a review
Step by step how to use our transfers.
Place & Remove Dust
Position your Product on the heat press and use a lint roller to remove any dust or fibers. Pre-press for wrinkles.
Place the Transfer & Press
Align your DTF transfer on the shirt, cover it with parchment paper, and press firmly according to the recommended temperature and time.
Peel & Press Again for Durability
Gently and immediately peel off the film while it's warm, then press once more for a few seconds to ensure a smooth, long-lasting finish.
