Men's T-Shirts — DTF-Ready Blanks
Men's-labeled blank tees — curved-hem, long-body, ringer, pocket, henley, tall and V-neck cuts from Bella+Canvas, Bayside, Tultex, Hanes, Next Level, Gildan and ComfortWash. Most of our unisex tees also fit men; this group is the styles cut specifically as men's. Cotton, CVC and triblend fabrics accept DTF transfers at standard settings. Placement tip: standard front prints on men's tees sit 10–12 inches wide, about 3 inches below the collar; on pocket tees either print above the pocket or use a 3–4 inch pocket-size design, and on ringers keep the artwork off the contrast trim.
Design in the DTF gang sheet builder or order DTF transfers by size. First press? See how to apply DTF transfers.
Add transfers to your blanks
One checkout — blanks ship from the apparel warehouse, transfers from our print shop. Press them when both arrive.
DTF by Size
Upload one design, pick the print size and press it straight onto these blanks.
Start by size ›
Gang Sheet Builder
Drag & drop many designs onto one sheet — the lowest cost per print for a full run.
from $5.00Build a gang sheet ›
UV DTF Stickers
For tumblers, hard goods and accessories — not for fabric. Pair with your merch drop.
from $10.50Open UV builder ›
Men's T-Shirts FAQ
Which blank t-shirts work best with DTF transfers?
Any of the tees in this collection press cleanly with DTF — 100% cotton, ring-spun, cotton-poly blends and tri-blends all hold a transfer. Heavier, tighter-knit fabrics give the flattest print surface; softstyle and tri-blend tees give a softer hand. Fabric details are listed on each product page.
Is there a minimum order for blank tees?
No. Order a single tee or a thousand — the price per piece is the same and there is no minimum quantity.
Can I mix sizes and colors in one order?
Yes. Combine any styles, colors and sizes in a single order. Each product page has a size × quantity grid so you can fill a full run in one add-to-cart.
How do blanks ship when I order them with transfers?
Blanks ship separately from our apparel warehouse via UPS — a flat $29.90 per blank order up to 36 pieces ($44.90 for 37+), and free when your blanks total is over $275. Your transfers ship from our print shop in their own package, so the two arrive separately.
What heat-press settings do these tees need?
Most cotton and cotton-blend tees press at the settings on our Pressing Guidelines page; performance polyester tees usually need a lower temperature. Check the fabric listed on the product page and test one piece before a full run.
More questions? See the blank apparel FAQ or pressing guidelines.
